Tilt Pegs Park

APPLY COUPON CODE

Labeled "the best scooter pegs ever" by test riders, Tilt Park Pegs are heat treated anodized 7075.  Tilt Park pegs are both light and tough while retaining a one inch diameter. In addition, Tilt Park pegs boast a thicker wall than the original park pegs and fit a greater variety of decks and forks.

This peg does NOT fit Lucky (deck and forks), TSI, Inward Extreme and Zero Offset forks. Requires longer axle (sold separately). Pegs sold in pairs.

• Heat treated 7075 aluminum

• 1" x 2" (25mm x 51mm)

• Anodized red finish

• 5.6 oz per set

Razor decks, choose 3.5" axle for one peg in the back, 4.5" for 2 pegs in back.

Phoenix decks, choose 3.5 inch axle for one peg in the back. Plus a HD bearing spacer.

Blunt decks, choose 3.0 inch axle for one peg in the back.

District Decks, choose 4.5 inch axle for one peg in the back.

MGP (Nitro, Ninja, Team) decks; choose 3.5 inch axle for one peg in the back, 4.5" for 2 pegs in back plus one Tilt spacer per peg.

1 pegs in front on steel fork (Razor, MGP Team, DSA), select the 2.5" axle.

1 pegs in front on Hybrid or Aluminum fork (Tilt, Phoenix, MGP Nitro), select the 3.0" axle.

2 pegs in front on steel fork, select the 3.0" axle.

2 pegs in front on Hybrid or Aluminum fork(Tilt, Phoenix, MGP Nitro), select the 3.5" axle.